Taking a Good Forage Sample
Forages are the basis of most of our livestock enterprises. Moreover, the nutritional make up of that forage should be the foundation of a balanced diet for our livestock but many times this is took for granted. Many factors (e.g. variety, maturity, growing conditions, handling practices, etc.) affect forage quality prior to the time it is fed. As a result, predicting forage quality values from standard books often grossly overestimates or underestimates feeding value. A better way to determine feeding value is to have a representative forage sample tested by a laboratory that uses
proven and accepted methods of forage analysis. It is strongly suggested that you choose a National Forage Testing Association Certified Lab.
Equipment required for collecting forage samples include a forage probe, a mixing bucket, and sample bags. The two most common types of hay probes are the Penn State or the Colorado. The Penn State probe will require a brace and bit or an electric drill to use. Both probes collect a good sample and are superior to a grab-sample. Most Extension offices have a probe that you can borrow. For more information on selecting a forage probe, refer to this article from Dr. Dennis Hancock. Forage should be sampled as near to the time of feeding or sale as possible.
The most important step in obtaining a meaningful analysis is to collect a representative forage sample. Extreme variation may occur in hay quality even when harvested from the same field. As a result, a separate forage sample should be tested for each hay “lot.” A “lot” refers to a quantity of similar forage. Each cutting should be sampled and marked in storage area where you know which is which.
For round bales and baleage select a minimum of 10 – 20 representative bales and collect two cores from the round side of each. Combine the cores in a bucket and mix well. Large round bales should be sampled to the center using a long probe or one with an extension adapter. Angle the probe in an upward direction to reduce the potential for water entering the core holes. In baleage, reseal core hole with tape made for sealing agricultural plastic to prevent spoilage. Regular duct tape is not sufficient and will deteriorate quickly in environmental conditions. For small square bales, select 20 bales and sample from the end at a straight inward line. Place the sample to be tested in plastic zip lock bag and label before taking to Extension office. Bags should be labeled with your name, lot name, date harvested, and species of grass. For more detailed information on collecting a forage sample go to www.foragetesting.org.
When the results comes back get with your Extension agent and go over it. They can help you tailor which lot to feed to each class of animal. The cost of the sample is money well spent in balancing your feed needs and will save you money in the end.
Fri, 01/11/2019 – 07:08
Sampling forage with hay probe.
Kansas State University
Source: Dairy Herd